performance-enhanced-additive
Performance Enhanced Additive
MT-10 EFFI
This is a premium metal treatment containing new ingredients .
By blending nano-onion-like carbon, it
reduces friction and wear even at low oil temperatures,
protecting the engine from dry starts.
- Engine protection during dry starts
- Long-term sustainability
- Reduced engine noise and vibration
- Improved response
- Improved engine durability
MT-10 engine refresher
This is a flushing agent that cleans and protects the engine
★ Protects the engine during flushing with anti-wear ingredients
★ Disperses and cleans sludge inside the engine and oil lines
Wako's EPS Engine Power Shield Oil rise/fall/leak prevention agent - 280ml
Dilatant fluid polymer mixed oil rise/fall Engine oil leakage prevention, agent
・The effect of dilatant fluid polymer thickens the oil film to prevent oil rise/fall.
・Increases compression and restores engine output.
・Prevents oil consumption of overdriving vehicles. -Prolongs oil life and protects the engine for a long time. -Recovers the elasticity of the oil seal and prevents engine oil from leaking or bleeding.
PLUS91 Plus91 325ML
Engine Oil Leak Stopper for Regular Vehicles
PLUS91 Plus91 325ML
PLUS 91 Plus 91 ECO 160ml
PLUS 91 Plus 91 ECO Oil Sealant Sealing effect Lubricating effect
Wako's S-FV・S Super For Vehicle Synergy 270ml
■ Capacity: 270ml
We have established “Synergy FM Technology” that can enhance the performance of both FMs by the synergistic effect of WAKOS’s proud organic FM and FM (Friction Modifire) born from Fujifilm’s supramolecular technology.
Synergy FM technology enhances the effect of WAKOS’s unique new liquid ceramics technology, dramatically improving the overall performance of engine oil, and further enhancing engine protection performance and energy-saving performance.
<How to use> Mix 1 part with 3 to 6 L of engine oil beforehand in the oil jug to make it even and then pour it into the engine.
《Applications》 Improve engine oil performance of industrial vehicles such as gasoline engines, diesel engines, turbo-equipped vehicles, motorboats, and forklifts.
<<Precautions>> Do not use the 2-cycle engine or the wet clutch in oil.
If the inside of the engine is dirty, be sure to brush it and replace the oil element.
WAKO'S NEW Fuel One - 200ml
[Enhanced cleaning performance]
Strongly clean up varnish deposit carbon accumulated in the fuel line!
<<Reduction of harmful exhaust gas and black smoke, fuel efficiency improvement, startability improvement, power recovery, vibration reduction, idling stabilization>>
Use one bottle for 20-60L of fuel. If the fuel is less than 20L, do not add more than 1%.
Cleaning, rust prevention, and lubricant for internal combustion engine fuel systems]
● Fuel additive for both gasoline (2-cycle and 4-cycle) and diesel
● Can also be used in hybrid and PHEV cars.
WAKO'S Power Air Conditioner Plus
Lubricant additive for car air conditioners. Features
1) Improves compressor lubricity, reduces air conditioner friction, and reduces fuel consumption and power loss when using air conditioners.
2) Improves wear resistance, sealability, and corrosion resistance, and improves the durability of air conditioner systems such as compressors, expansion valves, O-rings, and rubber hoses.
3) By removing and dispersing dirt inside the system, it improves the heat exchange rate, improves the cooling efficiency of the air conditioner, and prevents clogging in the system.
4) A stable and strong oil film is formed to reduce compressor operating noise and vibration.
Wako's RECS rapid engine cleaning system
Wako’s intake system cleaning system RECS
Due to the cleaning effect of a high-performance cleaning agent, the intake manifold, intake valve, piston head, cylinder head, and exhaust valve can be cleaned in a short time to improve combustion conditions. The effect of RECS lasts for about 200 km (about 2 weeks), so you can continue to wash during the period. It has the effects of “reducing harmful emissions,” “improving fuel efficiency,” “recovering engine power,” “reducing engine noise,” and “improving bounce.” In addition, simultaneous installation with “Fuel One” increases the cleaning effect because RCS penetrates into a stubborn carbon deposit that cannot be removed by “Fuel One”. *Recommended to run every 8,000 to 10,000 km or once a year.
Powerfully cleans up accumulated gum, varnish, carbon and deposits from the intake system to the combustion chamber in a short time.
The cleaning effect of the high-performance detergent quickly cleans the intake manifold, intake valves, piston head, and cylinder head, improving combustion conditions.
